{"id":3365,"date":"2026-09-08T18:18:31","date_gmt":"2026-09-08T10:18:31","guid":{"rendered":"http:\/\/www.fakazamusics.com\/blog\/?p=3365"},"modified":"2026-09-08T18:18:31","modified_gmt":"2026-09-08T10:18:31","slug":"how-to-clean-a-citrus-juicer-4a10-7d8a7a","status":"publish","type":"post","link":"http:\/\/www.fakazamusics.com\/blog\/2026\/09\/08\/how-to-clean-a-citrus-juicer-4a10-7d8a7a\/","title":{"rendered":"How to clean a Citrus Juicer?"},"content":{"rendered":"

Hey there! As a citrus juicer supplier, I get asked a lot about how to keep these nifty little machines clean. A clean juicer not only works better but also lasts longer. So, I’m here to share some tips on how to clean a citrus juicer like a pro. Citrus Juicer<\/a><\/p>\n

<\/p>\n

Why Cleaning Your Citrus Juicer is Important<\/h3>\n

First off, let’s talk about why cleaning your citrus juicer is so crucial. When you’re juicing oranges, lemons, limes, or grapefruits, there’s pulp, seeds, and juice residue left behind. If you don’t clean it, this stuff can build up over time. That buildup can clog the juicer, making it less efficient. You might notice it’s not squeezing out as much juice as it used to, and that’s no good.<\/p>\n

Plus, all that leftover fruit matter can start to grow mold and bacteria. Nobody wants to drink juice that’s been in contact with that yucky stuff. It can also affect the taste of your juice. You want fresh – tasting, healthy juice every time you use your juicer, right? So, cleaning is a must – do.<\/p>\n

Cleaning Right After Use<\/h3>\n

The best time to clean your citrus juicer is right after you’re done using it. It’s a lot easier to get rid of the fresh residue than to deal with dried – on gunk later.<\/p>\n

Step 1: Unplug the Juicer<\/h4>\n

Safety first! Before you start cleaning, make sure the juicer is unplugged. You don’t want any accidental starts while your hands are in there.<\/p>\n

Step 2: Remove the Parts<\/h4>\n

Most citrus juicers have removable parts like the juicing cone, strainer, and pulp container. Take these parts out carefully. This makes it easier to clean each piece thoroughly.<\/p>\n

Step 3: Rinse with Warm Water<\/h4>\n

Hold the removable parts under warm running water. This will start to wash away the loose pulp, seeds, and juice. You can use your fingers to gently rub the parts to get rid of any stubborn bits. For the juicing cone, make sure to get into all the grooves where pulp likes to hide.<\/p>\n

Step 4: Use a Soft Brush<\/h4>\n

If there’s still some residue left, grab a soft brush. You can use a small kitchen brush or even an old toothbrush. Dip it in warm, soapy water and gently scrub the parts. Pay extra attention to the strainer. The holes in the strainer can get clogged with pulp, so make sure to clean them out well.<\/p>\n

Step 5: Wash the Base<\/h4>\n

The base of the juicer usually doesn’t get as dirty as the removable parts, but it still needs a little love. Dampen a cloth with warm, soapy water and wipe down the base. Make sure to get into all the corners and edges. Then, dry it off with a clean towel.<\/p>\n

Deep Cleaning<\/h3>\n

Even if you clean your juicer after every use, it’s still a good idea to do a deep clean every once in a while. This will get rid of any hidden buildup and keep your juicer in top shape.<\/p>\n

Step 1: Soak the Parts<\/h4>\n

Fill a sink or a large bowl with warm, soapy water. You can use a mild dish soap. Submerge the removable parts of the juicer in the water and let them soak for about 15 – 20 minutes. This will help loosen up any tough stains and residue.<\/p>\n

Step 2: Scrub Again<\/h4>\n

After soaking, take the parts out of the water and give them another good scrub with the soft brush. You’ll probably notice that a lot more of the residue comes off easily. Rinse the parts thoroughly under running water to make sure all the soap is gone.<\/p>\n

Step 3: Clean the Motor Area (If Accessible)<\/h4>\n

Some juicers have an accessible motor area. If yours does, use a dry cloth to wipe away any dust or debris. Be very careful not to get any water in the motor. If you’re not sure how to clean the motor area, check your juicer’s manual.<\/p>\n

Step 4: Sanitize<\/h4>\n

To kill any bacteria, you can sanitize the parts. You can make a sanitizing solution by mixing one part white vinegar with three parts water. Soak the removable parts in this solution for about 10 minutes. Then, rinse them well under running water and let them air dry completely.<\/p>\n

Tips for Keeping Your Juicer Clean<\/h3>\n